Skip to Main Content
Navigated to Department of Civil Engineering.

Department of Civil Engineering


Professor Ann E. (Beth) Wittig, Chair • Department Office: Steinman 119• Tel: 212-650-8000

General Information

The City College offers the following graduate degrees in Civil Engineering:

M.E. (C.E.) (Professional Master’s Degree)
M.S. (Engineering) (Degree is awarded to students who do not have a bachelor’s degree in engineering)
Ph.D. (C.E.)

Programs and Objectives

For both Master’s and Ph.D. degrees, the Department of Civil Engineering offers program of graduate study in the following areas:

Environmental Engineering and Water Resources

Structural Engineering and Mechanics

Transportation Engineering

Advisement

For Master's Program

Water Resources and Environmental Engineering
Professor H. Tang

Structural Engineering and Mechanics
Professor F.B. Lin

Transportation Engineering
Professor M. Allahviranloo

For Doctoral Program in all three areas

Professor N. Krakauer

Civil Engineering, Advanced Certificate in Special Topics, Advanced certificate (Adv. Crt.)

The Department of Civil Engineering offers Advanced Certificates in Special Topics in the seven areas listed below. For more information contact the Chair of the Department.

Certificate Requirements

A. Structural Engineering

CE H5300

Advanced Structural Design

3

CE H5000

Advanced Reinforced Concrete

3

CE I5400

Linear and Nonlinear Analysis of Structures

3

And one of the following:

CE H5200

Bridge Engineering

3

CE H5100

Prestressed Concrete

3

CE H9000

Foundation Engineering

3

B. Environmental Engineering

CE H7100

Water Quality Analysis

3

CE H7500

Unit Operations in Environmental Engineering

3

CE H7600

Unit Processes in Environmental Engineering

3

And one of the following:

CE H7400

Industrial Wastewater Treatment

3

CE I7000

Wastewater Treatment Plant Design

3

C. Water Resources Engineering

CE H6300

Groundwater Hydrology and Contamination

3

CE H0700

Advanced Hydraulics

3

CE H6600

Engineering Hydrology

3

And one of the following:

CE I6300

Water Resources Modeling

3

CE H0800

Applied Hydraulics in Engineering

3

D. Transportation Engineering

Three courses from the following list:

CE H0200

Transportation Economics

3

CE H2000

Traffic Engineering

3

CE H4500

Urban Transportation

3

CE H4700

Urban Freight and City Logistics

3

CE H4800

Transit Systems: Planning and Operations

3

CE I2600

Urban Transportation Planning

3

One additional elective

Laboratories

Computational Facilities

The Department has two instructional laboratories with PCs.

Materials of Engineering Laboratory

The Materials of Engineering Laboratory houses an Instron 8500 series Testing Machine. This is a computer controlled servo–hydraulic machine and capable of applying 55 kips (250 kN) dynamic loads. Supporting electronic control, data acquisition and computer software systems are available. Additional equipment for the static, dynamic and fatigue testing of materials include testing machines for tension, compression, transverse-bending and torsion investigation. The laboratory contains hardness testing machines, impact testers, strain signal conditioning consoles, and assorted peripheral equipment. Facilities for preparing and curing concrete include walk-in temperature humidity control chambers. Optical Systems for surface strain measurements using digital image correlation are available. Electrochemical facilities for determining the rate of corrosion of steel allow for potentiostatic, galvanostatic and frequency response analysis. Nondestructive testing facilities include 4-channel acoustic emission system for early detection of incipient defect growth, ultrasonic V-meter, ultrasonic signal generation, digitalization and analysis capacities.

Soil Mechanics Laboratory

The Soil Mechanics Laboratory is equipped to perform standard identification tests of soils, such as grain size distribution, liquid and plastic limits and compaction properties. In addition, facilities to perform detailed testing of undistributed samples (consolidation and triaxial shear) are available. A moist room is available for long term sample storage.

Fluid Mechanics Laboratory

The Fluid Mechanics Laboratory is equipped for studying both compressible and incompressible fluid media. Flow rates of up to 5 cubic feet per second of water are provided by each of the three independent high-pressure systems equipped with constant head controls. Two constant-head supply tanks located in the laboratory provide needed discharge capacities. The laboratory contains a tilting flume 52 ft. long, a water tunnel, pumps, turbines, a hydraulic bench, and various units for the study of frictional phenomena involving water and oil. A one-dimensional Laser Doppler Anemometer is used for the study of flow velocities in pipes and near boundaries. In addition, the Lab has a state-of-the-art wave tank. This tank is 6 feet wide by 4 feet high and 40 feet long. It is equipped with computer controlled five-paddle generator. This system can produce single waves, random waves, and angle waves. A two-dimensional Laser Doppler Velocimeter (LDV) equipped with computer controlled 3-D traverse and fully automated data acquisition system are used in the wave tank for studying beach hydraulics and off-shore similitudes. In addition, a Particle Image Velocimeter (PIV) is available for analysis of particles in a flow field. The Lab is also equipped with a titling sand flume for studying flow through porous media and groundwater contamination. A fully automated freeze and thaw machine is also available for graduate research work.

Environmental Engineering Laboratory

The Environmental Engineering Laboratory is equipped for experimental evaluation of unit processes and operations in water and wastewater treatment as well as analysis of all physical, chemical and microbiological water quality parameters. The experimental facilities include settling columns, suspended and attached growth biological reactors, computer controlled bioreactors for kinetic studies, a bench scale UV chamber, a 12 gpm 15-foot bubble contactor for ozone studies complete with ozone generator, gas and liquid phase ozone residual monitors and off-gas destructor, TOC/TN Analyzer, BIOFLO 310 Autoclavable Benchtop Fermentation System, IMAG System MULTIDOC-IT/LM-263, TF-7300 RT PCR System for DNA/RNA Analysis and all conventional experimental devices used in determination of chemical dose requirements for water and wastewater processing. An environmental chamber for temperature controlled experiments is also available.

The analytical capabilities of the laboratory include gas chromatograph-mass spectrometer/ECD with purge/ trap, inductive coupled plasma spectrometer (ICP) gas chromatograph with EC and FID detectors, total organic carbon analyzer, Dionex, dual channel ion chromatography system, water quality autoanalyzer, UV-visible double beam spectrophotometer with stopped-flow device, and phase contrast/epiflouresence research microscope. Field monitoring equipment include water quality monitors with multiple probes and flourometers.

Dynamics and Structural Control Laboratory

The Dynamics and Structural Control Laboratory (DSCL) facilitates advanced research in earthquake engineering, and the developmental of smart and intelligent structural systems. A smart and intelligent structural system has in–built capability to sense the vibration due to natural hazards such as earthquakes and extreme wind loads, and modify its behavior to minimize vibration, damage and discomfort to occupants of the structure. The DSCL is equipped with a 30 feet by 15 feet strong floor system with 100 kips inserts for static and dynamic testing of structures, a state-of-the-art 10,000 lb one directional (horizontal) shaking table system capable of simulating near-field ground motions with velocities up to 2 meters per second, a 6 story building frame model with replaceable elements to simulated nonlinear response of structures, 24 channel 2 MHz simultaneous data acquisition system, 24 channel d-space controller for real time implementation of controllers using MATLAB, and a computer based visualization and image correlation system for damage detection in structural systems being tested on the strong floor.

Faculty

Anil Agrawal, Professor
B.Tech., IIT (India); M.E., Univ. of Tokyo; Ph.D., Univ. of California (Irvine); P.E. (New York)

Mahdieh Allahviranloo, Assistant Professor
B.E., Sharif Univ. of Tech.; M.S., Iran Univ. of Science and Tech.; Ph.D., Univ. of California (Irvine)

Alison Conway, Associate Professor
B.S., Univ. of Delaware; M.S. Ph.D., Univ. of Texas (Austin)

Julio Davalos, Professor
B.S., M.S., Ph.D. (Structural Mechanics), Virginia Tech.

Naresh Devineni, Associate Professor
B.E., Osmania University, India; M.S., Ph.D., North Carolina State University (Raleigh)

Vasil Diyamandoglu, Assistant Professor
B.S., Bogazici Univ. (Istanbul, Turkey); M.S., Ph.D., Univ. of California (Berkeley)

Balazs M. Fekete, Assistant Professor
M.S., Technical Univ. of Budapest (Hungary); Ph.D. (Earth Sciences), Univ. of New Hampshire

John Fillos, Professor
B.E., CCNY; M.S., Ph.D., New York Univ.; P.E. (New York)

Michel Ghosn, Professor
B.S., M.S., Ph.D., Case Western Reserve Univ.

Camille Kamga, Associate Professor
B.S., Univ. of Moncton (Canada); M.E., CCNY; Ph.D., City Univ. of New York

Reza M. Khanbilvardi, Professor
B.S., Pahlavi Univ. (Iran); M.S., Ph.D., Pennsylvania State Univ.; P.E. (New York, Connecticut)

Nir Krakauer, Associate Professor
B.S.E. (Engr. Physics), Univ. of Michigan (Ann Arbor); M.S. (Geochemistry), Ph.D. (Geochemistry), California Inst. of Technology

Feng–Bao Lin, Associate Professor
B.S., National Taiwan Univ.; M.S.; Ph.D., Northwestern Univ.; P.E. (New York, Connecticut)

Robert E. Paaswell, Distinguished Professor
B.E., Columbia Univ.; M.S., Ph.D., Rutgers Univ.; P.E. (New York)


Michael Piasecki, Associate Professor
Engr. Dipl., Univ. of Hanover (Germany); Ph.D., Univ. of Michigan (Ann Arbor)

Hansong Tang, Associate Professor
B.S. (M.E./E.E.), Wuhan Univ.; M.S., D.Sc. (Math), Peking Univ.; Ph.D., Georgia Tech.

Charles Vörösmarty, Professor
B.S. (Biological Sciences), Cornell Univ.; M.S., Ph.D. (Engineering Systems Design), Univ. of New Hampshire

Ann E. (Beth) Wittig, Associate Professor and Chair
B.S. (Chem. E.), Univ. of California (Los Angeles); Ph.D. (Chem. E.), Univ. of Texas (Austin); P.E. (New York); L.E.E.D. A.P.

Ardavan Yazdanbakhsh, Associate Professor
B.S., Azad Univ. (Central Branch); M.S. (C.E./Structural Engr.), Univ. of Sharjah (UAE); Ph.D., Texas A&M Univ.

Professors Emeriti

J. E. Benveniste

G. Donald Brandt

Carl J. Costantino

Norman C. Jen

Claire E. McKnight

Norbert Oppenheim

Gerald Palevsky

George Papoulas

Neville Parker

Ming L. Pei

Joseph Pistrang

Eli Plaxe

Morris D. Silberberg

James R. Steven